Author Topic: Oops! I forgot to check the OG!  (Read 1860 times)

Offline 3sheets2wind

  • BeerSmith New Brewer
  • *
  • Posts: 2
  • BeerSmith 2 Rocks!
Oops! I forgot to check the OG!
« on: January 03, 2014, 09:59:58 AM »
On our last brew bay we had a few friends over for a holiday party. A couple of us decided to brew, but we got a little distracted during and I forgot to check my gravity. I didn't even think about it until I had already pitched the years and sealed the fermenter. At that point I decided to just let it ride and see how it turned out. To be honest I didn't expect much from this beer, but now it's bottled and carbonated and I'm much happier with it than I thought I would be. So naturally now I'm curious about the ABV and I'm wondering if there is a way to figure that out at this point.

Does anyone know a way to figure the ABV after bottling?

Offline Oginme

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 2552
  • Goats, guitars, and a home brew; Life is good!
    • Longvu LaManchas
Re: Oops! I forgot to check the OG!
« Reply #1 on: January 03, 2014, 12:24:49 PM »
in the 'tools' section of BeerSmith, select the refractometer tool.  Enter the refractometer reading of the finished beer in Brix and the hydrometer reading in specific gravity.  Make sure you degas the sample completely before taking the readings.  On the calculation selection, select 'Original Gravity of Finished Beer' and BeerSmith will give you the approximation of the original gravity.
Recycle your grains, feed them to a goat!

 

modification