Maybe having a better idea of what you mean by "sterile sort of flavour" might help. I've quoted below directly from John Palmers "How To Brew" book. Do any of these fit what you're tasting?
Alcoholic
A sharp flavor that can be mild and pleasant or hot and bothersome. When an alcohol taste detracts from a beer's flavor it can usually be traced to one of two causes. The first problem is often too high a fermentation temperature. At temperatures above 80°F, yeast can produce too much of the higher weight fusel alcohols which have lower taste thresholds than ethanol. These alcohols taste harsh to the tongue, not as bad as cheap tequila, but bad nonetheless.
Fusel alcohols can be produced by excessive amounts of yeast, or when the yeast sits too long on the trub. This is one reason to move the beer off of the hot and cold break when the beer is going to be spending a lot of time in the fermentor.
Medicinal
These flavors are often described as mediciney, Band-Aid™ like, or can be spicy like cloves. The cause are various phenols which are initially produced by the yeast. Chlorophenols result from the reaction of chlorine-based sanitizers (bleach) with phenol compounds and have very low taste thresholds. Rinsing with boiled water after sanitizing is the best way to prevent these flavors.
Metallic
Metallic flavors are usually caused by unprotected metals dissolving into the wort but can also be caused by the hydrolysis of lipids in poorly stored malts. Iron and aluminum can cause metallic flavors leaching into the wort during the boil. The small amount could be considered to be nutritional if it weren't for the bad taste. Nicks and cracks ceramic coated steel pots are a common cause as are high iron levels in well water. Stainless steel pots will not contribute any metallic flavors. Aluminum pots usually won't cause metallic flavors unless the brewing water is alkaline with a pH level greater than 9. Shiny new aluminum pots will sometimes turn black when boiling water due to chlorine and carbonates in the water.
The protective (grayish) oxides of aluminum can be enhanced by heating the clean pot in a dry oven at 250°F for about 6 hours.
Solvent-like
This group of flavors is very similar to the alcohol and ester flavors, but are harsher to the tongue. These flavors often result from a combination of high fermentation temperatures and oxidation. They can also be leached from cheap plastic brewing equipment or if PVC tubing is used as a lautering manifold material. The solvents in some plastics like PVC can be leached by high temperatures.