Author Topic: Imaging winblows and BS  (Read 2682 times)

Offline mordantly

  • CNC Machinist
  • BeerSmith Apprentice Brewer
  • **
  • Posts: 10
  • MoRdAnTlY
    • MoRdAnTlY's Site
Imaging winblows and BS
« on: June 29, 2011, 06:17:28 PM »
At minimum, yearly I reformat my HDD and reload an image onto the winblows partition. To make the constant re-imaging work with..

BS 2.x, you need to copy the BS data folder only (usually in My Documents/BeerSmith2 PRIOR to restoring an image into a usable state on the drive onto somesort of usb media. Once the drive is back to a fresh state, copy the folder to My Dccuments, and you will find registration code as well as all recipes, settings, etc are functioning!

BS 1.x saves EVERYTHING into the installation folder, so you can copy the entire folder to usb media, then restore the image and copy it back to the same location.. default of Program Files/BeerSmith.
MoRdAnTlY [Mr. Wolf '91 - '11]

Offline edybala

  • BeerSmith New Brewer
  • *
  • Posts: 2
  • BeerSmith 2 Rocks!
Re: Imaging winblows and BS
« Reply #1 on: July 04, 2018, 10:24:38 AM »
Do you have any knowledge for BS3??

Thanks

 

modification