Author Topic: End of gravity runnings  (Read 923 times)

Offline BudVarMan

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 5
  • BeerSmith 2 Rocks!
End of gravity runnings
« on: December 06, 2019, 01:44:40 PM »
I'm doing BIAB, what do I enter for Sparge run-off PH and end of running gravity in the session tab

Offline BOB357

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 554
  • Beer is my bucket list!
Re: End of gravity runnings
« Reply #1 on: December 06, 2019, 01:49:59 PM »
That generally applies to fly sparging and is only entered for future reference. Just leave the box as is.
Bob

Offline BudVarMan

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 5
  • BeerSmith 2 Rocks!
Re: End of gravity runnings
« Reply #2 on: December 06, 2019, 02:05:34 PM »
Thanks

Offline TwoThings

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 9
  • Just worry about making beer YOU like...
Re: End of gravity runnings
« Reply #3 on: December 06, 2019, 05:24:41 PM »
I'm doing BIAB, what do I enter for Sparge run-off PH and end of running gravity in the session tab

Do you have a pH meter?  If you do, you can find what to enter for the Sparge Run-off pH.  Towards the end of my sparge I sent some wort into a hydrometer tube, tested the pH, and took a gravity reading.  That's all there is to it.  Do you need to do that?  No.  But the end of sparge pH helps to ensure you don't over sparge and raise the pH beyond 6.0  I try to stop around or before 5.8.  After 6 you can start extract some tannins and get some off-tastes.

The gravity reading helps to determine your efficiency. Some people just like to stop sparging at 1.010 or whenever they notice it quits moving. 
On Tap as of 1/12/2020

-Oatmeal Stout

Go to commercial beers:
-Stag and the King