Author Topic: fly sparge water amounts HIGH  (Read 476 times)

Offline beeman

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 5
  • BeerSmith 2 Rocks!
fly sparge water amounts HIGH
« on: June 22, 2019, 06:57:46 AM »
Simply stated, my fly sparge water amount indicates a MINUS 1623.91 gallons  ( 5 gallon batch).  What might be the  fix / problem?
Thanks.

Offline Oginme

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 2555
  • Goats, guitars, and a home brew; Life is good!
    • Longvu LaManchas
Re: fly sparge water amounts HIGH
« Reply #1 on: June 22, 2019, 07:43:36 AM »
The issue is going to be in your profiles.  Without seeing them, I would guess that you are calling for too much water uo front or topping off with too much water and forcing the program to suvtract that volume in the only place it can, which is the sparge.

We can give some more specific help if you export the recipe as a .bsmx file.  You can do this by clicking once on the file name, clocking on 'file' > 'export selected' and saving the file as a .bsmx file.  Attach this to your next post here so we can open it to see how your profiles are set and where you can correct the issue.
Recycle your grains, feed them to a goat!