Author Topic: Troubles adjusting an extract recipe from a all-grains  (Read 2564 times)

Offline Grummore

  • BeerSmith Brewer
  • ***
  • Posts: 34
  • BeerSmith 2 Rocks!
Troubles adjusting an extract recipe from a all-grains
« on: March 09, 2017, 01:32:14 PM »
Greetings,

I was wondering if someone could help me adjust or at least point me how I could modify an extract recipe (in attachement) I made out of an existing all-grains one.

I'm trying to transform an Irish Red Ale All-Grains to an Extract recipe and I cannot find a way to adjust the ingredient so the extract look like the all-grains.

I have put in attachement, the All-Grain bsxml file I am trying to convert and the bsxml file of the extract recipe I did so far.

Thank you for your time.

Offline Oginme

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 2175
  • Goats, guitars, and a home brew; Life is good!
    • Longvu LaManchas
Re: Troubles adjusting an extract recipe from a all-grains
« Reply #1 on: March 09, 2017, 06:53:47 PM »
First, understand that you will probably be a couple points high on your color using extract.  The process of removing the water causes some gain in color of the wort/extract.  Your 'Pale liquid Extract' is at 8 SRM according to your recipe, which is a bit on the high side for light extract.  Briess Golden light LME is 6 SRM. 

Now, for your conversion of this recipe.  I would take your 2-row pale malt and sub it in for the lightest extract you can get.  Now click on the slider below the recipe box and enter the target OG for the recipe.  This will cause some variation on the color and bitterness.  You can do the same adjustment to the bitterness by clicking on the slider and entering in the IBU target from the original recipe.

Any attempt to get the color to match the standard will result in changing the specialty malts and change the flavor profile of the original recipe.

Recycle your grains, feed them to a goat!

Offline Grummore

  • BeerSmith Brewer
  • ***
  • Posts: 34
  • BeerSmith 2 Rocks!
Re: Troubles adjusting an extract recipe from a all-grains
« Reply #2 on: March 09, 2017, 09:41:41 PM »
oooooh! Thanks! I never noticed that I could play with the 4 colored lines (Grav, Color, Bitter, %).

Offline jomebrew

  • Global Moderator
  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 956
    • Jomebrew
Re: Troubles adjusting an extract recipe from a all-grains
« Reply #3 on: February 05, 2018, 03:16:47 PM »
Yeah, spam. But why? Not really a discussion topic in the thread though.

 

modification