Author Topic: Scaling up to 3 BBL from 10 gallons  (Read 218 times)

Offline e_hattaway

  • BeerSmith New Brewer
  • *
  • Posts: 1
  • BeerSmith 2 Rocks!
Scaling up to 3 BBL from 10 gallons
« on: December 04, 2019, 01:35:55 PM »
I was scaling up a 10 gallon batch of a nice Vienna style lager from 10 gallons to 93 gallons (3 BBL).  In my 10 gallon batch my recipe calls for around 15# of vienna malt and 2.5# of flaked corn.  After scaling up with beersmith the recipe calls for 37# Vienna and 110# flaked corn.  Does this sound right? 

Offline BOB357

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 438
  • Beer is my bucket list!
Re: Scaling up to 3 BBL from 10 gallons
« Reply #1 on: December 04, 2019, 03:27:17 PM »
I think what's happening is you have the box for match OG, Color and Bitterness checked in the scaling tool. The tool is likely giving you this unreasonable scaling of grain/adjunct to match color. Try unchecking the box. You may need to dial in the IBU/SG ratio to match that of the original recipe as well as the ABV, but the malt/adjunct ratio should be linear, or very close.
Bob

Offline brewfun

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 2191
  • STAND BACK! I'm going to try Science!
Re: Scaling up to 3 BBL from 10 gallons
« Reply #2 on: December 06, 2019, 11:41:51 AM »
I find that in scaling, most of the gravity should come from pale malt, rather than specialty malts.

After using the scaling function, use the Vienna malt to get to the right color, then adjust the corn to get the same gravity you get from corn in the 10 gallon recipe. The last adjustment should be to add pale or pils malt to get to the same OG as the original.
Beer Appreciation is the space between pints.